Victron MultiPlus 24/3000/70-50 230V VE.Bus Inverter Charger

Victron MultiPlus 24/3000/70-50 230V VE.BUS Inverter Charger

Victron Energy

  • $1,399.00


Victron MultiPlus 24/3000/70-50 230V VE.Bus Inverter Charger

Victron MultiPlus

Victron Multiplus inverter chargers are available in models ranging from 3000VA to 5,000VA with leading features like generator assist and lithium battery compatibility. Ideal for larger motorhomes and boats. Victron 5 year warranty

Advanced Programmable Battery Charger

The Victron Multiplus battery charger features adaptive four-stage charging. Battery life is improved with the adaptive algorithm which reduces charging when the battery system is only lightly used. Charge profiles are selectable for flooded, gel, AGM and lithium batteries as well as custom charge voltages.

Two AC Outputs

The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the MultiPlus takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the Victron MultiPlus. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output. (second output available on models rated at 3 kVA and more).

Unique PowerAssist feature

The PowerAssist feature allows the Victron Multiplus to provide uninterrupted power where other inverter chargers would overload and shut down. When an overload is imminent the battery charging is first reduced. Secondly, the inverter function is used to boost the output from the battery supply. This is particuarly useful for systems with small portable generators.

Integrated Transfer Switch

System complexity is greatly reduced with the integration of a high-speed transfer switch inside the Victron Multiplus. Uninterrupted AC power is provided to the output circuit while the AC input is connected/disconnected. This removes the need for a manual inverter/generator switch or separate inverter only powerpoints.

Virtually unlimited power thanks to parallel operation

Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability

In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl - Dealing with limited generator, shoreside or grid power

The MultiPlus is a very powerful battery charger. It will, therefore, draw a lot of current from the generator or shore side supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist - Boosting the capacity of shore or generator power

This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure

The MultiPlus can be used in off grid as well as grid-connected PV and other alternative energy systems. Loss of mains detection software is available.

System configuring

- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. - Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software. - Off-grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control

Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power Panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring and control

Victron Ethernet Remote, Venus GX and the Color Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring

When connected to the Ethernet, systems with a Color Control panel can be accessed remotely and settings can be changed.
Part number : PMP243021011  

We Also Recommend