Victron Energy 1000 Amp Lynx Ion BMS for 24 volt Lithium Ion Batteries
The 1000 Amp Lynx Ion BMS is the controller for the entire Lithium Ion battery system, it is for use only with Victron 24 Volt Lithium Ion Batteries. The Lynx Ion communicates with the batteries using a Can Bus network. As well as controlling and monitoring the batteries it incorporates circuit protection for the batteries and the major loads in the system and it is the monitor which generates information on state of charge. Data from the Lynx Ion is available to be displayed on a Color Control GX (sold separately)
The Lynx Ion BMS is the safety and control unit of the system. It protects the connected battery modules against over-charging, over-discharging, over-temperature and under-temperature. The Lynx Ion BMS also takes care of the balancing on battery cell and module level. In order to guarantee a safe operation of the system, a safety contactor is implemented that can disconnect the batteries from the chargers and loads when necessary.
Each battery comes with an integrated battery management system (BMS). This is an intelligent electronic module (slave BMS) that measures all cell voltages, temperatures and controls the balancing. Each slave BMS has an intelligent balancing system that allows balancing on battery cell and module level. The battery modules communicate by CAN-BUS with the Lynx Ion BMS. The status of the battery modules are collected and monitored. If the measured values from a battery module exceeds the limit, the Lynx Ion BMS will automatically takes action to protect the connected battery modules.
The Lynx Ion contains a safety contactor which can disconnect the batteries in the event of an under or over voltage situation or over temperature.
SKU : LYN050210000